Contact Us
TEL : 86-21-39529737
Fax: 86-21-69000220
E-mail: gaoyl@zhuyualloy.com
Address: No.505 Yujidun Road Jiading Shanghai China.
Nickel Based Centrifugal Casting Powder

Nickel Based Centrifugal Casting Powder

Nickel Based Centrifugal Casting Powder Advantages of Global Fusion Centrifugal Casting Ni Based Powder: ●Good self-melting, Clear “Mirror Surface”, Smooth Clad Layer. ●High Deposition Rate, Tiny Soot. ●High Sphericity, Uninterrupted Powder Feeding. ●Wide Solid-Liquid Phase,Good...

Nickel Based Centrifugal Casting Powder
Advantages of Global Fusion Centrifugal Casting Ni Based Powder:

●Good self-melting, Clear “Mirror Surface”, Smooth Clad Layer.
●High Deposition Rate, Tiny Soot.
●High Sphericity, Uninterrupted Powder Feeding.
●Wide Solid-Liquid Phase,Good Manufacturability, Strong Operatibility.
●Strong Slaggability, Welding Layer has no defect of slag and pore, Performance of Cladding Layer is better than the similar Product.


Global Fusion Centrifugal Casting Ni Based Powder Specifications:

Alloy Family

Powder

HRC

Chemical Composition

Coating Method

Mesh

Typical Application 

C

Cr

Si

Fe

Mo

Ni

Mn

B

Co

Other


Ni Base

NJ582

55

0.3

7.0

3.0

5.0

 

Bal

0.8

3.0

 

Co:9.5

Centrifugal Casting on ID Surface

40/300

Extrusion bi-metal barrels

NJ583

45

0.5

8.0

1.5

10.0

 

Bal

0.8

3.0

 

Co:35.0, Cu:1.5

Centrifugal Casting on ID Surface

40/300

NJ584

62

0.5

8.0

3.2

 

2.5

Bal

0.5

3.5

 

Co:8.5

Centrifugal Casting on ID Surface

40/300


Introduction of Centrifugal Casting Process:
Centrifugal casting is a method of casting parts having axial symmetry. The method involves pouring molten metal into a cylindrical mold spinning about its axis of symmetry.
The mold is kept rotating till the metal has solidified.
As the mold material steels, Cast irons, Graphite or sand may be used.
The rotation speed of centrifugal mold is commonly about 1000 RPM (may vary from 250 RPM to 3600 RPM).


A centrifugal casting machine is schematically presented in the picture:

image001.jpg

Centrifugal casting technology is widely used for manufacturing of iron pipes, bushings, wheels, pulleys bi-metal steel-bronze bearings and other parts possessing axial symmetry.


Features of Global Fusion Powder:

Powder of three main alloys: cobalt-base alloy, nickel-base alloy, and 

iron-base alloy, stellite alloy
2) Properties: good resistance against high-temperature, corrosion, wear, 
shock and stick abrasion
3) Main application: use to repair and pre-protection of valve seat, pump 
shaft sleeve and valve gate
4) Process: OXY, PTA, high frequency remelting 
5) Specifications: 150/320, 200/400, 280/400, 180/400, 60/170, 60/200 

Application Industry

12.png


Four No-Passing Principles for Unqualified Products

No-Passing of Unclear Reasons

No-Passing of Vague Responsibilities

No-Passing of Unimplemented Education and Treatment

No-Passing of Unimplemented Corrective and Preventive Action


image017.jpg

Cooperative Project:

Joint Tsinghua University to develop Laser Powder and 3D consumable Powder, Joint Shanghai Jiao Tong University and Fudan University to develop alloy amorphous submicron powder material, Joint Harbin Institute of Technology to develop amorphous and submicron powder material, Joint Hebei University of Technology to develop magnetic submicron powder material, Joint Beijin Institute of Technology to develop high temperature alloy submicron powder material, Joint Tianjin University to develop remanufacturing material auto engine, Joint Tianjin University of Technology to develop laser and remanufacturing material, etc.

 FAQ

1.Q. Why choose US?

(1)We have an experienced technical team understanding different applications. So we can give best advice to our customer about choosing materials and process.

(2).For more than 50 years' development,

● Gas atomized system is used for alloy powder production.

● Powder is carefully screened.

● Accurately control the chemical and particle size.

● Product quality is very consistent.

● Customization is accepted.

2.Q.What is the MOQ ?
A. No MOQ for our existing stock, for special size, MOQ is 5 KGS.
3.Q. Can I place a mixed order?
A. Sure!
4.Q. Can I get a lower price if I order large quantities?
A. Yes, big order get big discount.
5.Q. Do you provide samples ? Is it free or extra ?
A. Yes, we will send you sample before mass production, and start production by your approval. Most sample is free,  you only need to pay the freight.
6.Q. When you ship my order?
A. Normally 7-18 days after receiving your payment, but it can be negotiated based on order qty and production schedule.
7.Q. If I need any products hurry, could you make them fast for me?
A. Yes. If you are hurry, we will make the products as fast as we can and delivery them in the fast shipment.
8.Q. How can you guarantee the production quality ?
A. Our production is based on ISO9001,we have more than 40 years experience of QC team and strictly quality control system in our production process. At the same time, before sent the products, we will sent the free sample for you to test.
9.Q. What about the package?
A. It can make as you need and depend on the products shapes. Generally, we can provide iron drum, carton, wooden case, and bag packages.

Related Products
Inquiry
Local Business Directory, Search Engine Submission & SEO Tools